J200M0
|
Normal density metallization on plain side and other side plain
|
8,9,10,12,23 µ
|
-
Standard Density
-
Standard Metal Bond Strength
-
Standard Water Vapour and Gas Barrier properties
-
Good Lamination Bond Strength
-
Excellent Machinability
|
Suitable for flexible packaging application, especially for higher gloss and barrier properties.
|
|
|
J200M4
|
High density metallization on plain surface with plasma treatment and other side plain.
|
12 µ
|
-
High Density
-
Standard Metal Bond Strength
-
High Water Vapour and Gas Barrier properties
-
Good Lamination Bond Strength
-
Excellent Machinability
|
Suitable for flexible packaging application, especially for high barrier properties.
|
|
|
J201M0
|
Normal density metallization on Corona side and other side plain
|
7,8,9,10,12,15,19,23,36,50 µ
|
-
Standard Density
-
Improved Metal Bond Strength
-
Standard Water Vapor and Gas Barrier properties
-
Good Lamination Bond Strength
-
Excellent Machinability
|
Suitable for flexible packaging application, especially for higher gloss and barrier properties.
|
|
|
J201M1
|
Normal density metallization on Corona side and other side plain
|
8,9,10,12,15,23,36 µ
|
-
Standard Density
-
Standard Metal Bond Strength
-
Standard Water Vapor and Gas Barrier properties
-
Good for Printing and Lamination
-
Excellent Machinability
|
Suitable for flexible packaging application, especially for higher gloss and barrier properties.
|
|
|
J202M0
|
High density Metallization on corona surface and other side plain
|
8,10,12 µ
|
-
Average Density
-
Standard Metal Bond Strength
-
Moderate Water Vapour and Gas Barrier properties
-
Standard Lamination Bond Strength
-
Excellent Machinability
|
Suitable for flexible packaging application, especially for higher gloss and barrier properties.
|
|
|
J202M1
|
High density Metallised on plain surface with plasma and other side corona treated.
|
10,12,36 µ
|
-
Average Density
-
Standard Metal Bond Strength
-
Moderate Water Vapour and Gas Barrier properties
-
Standard Lamination Bond Strength
-
Excellent Machinability
|
Suitable for flexible packaging application where high barrier is required
|
|
|
J202M4
|
High density Metallization on corona surface and other side plain
|
8,10,12 µ
|
-
High Density
-
Standard Metal Bond Strength
-
Good Water Vapour and Gas Barrier properties
-
Good Lamination Bond Strength
-
Excellent Machinability
|
Suitable for flexible packaging application, especially for high barrier properties requirement
|
|
|
J221M0
|
Normal density metallization on pre-coated co polyester side and other side plain
|
8,10,12,23 µ
|
-
Standard Density
-
Good Metal Bond Strength
-
Standard Water Vapour and Gas Barrier properties
-
Standard Lamination Bond Strength
-
Excellent Machinability
|
Suitable for flexible packaging application where good barrier and high metal bond is required,
film is not recommended for liquid / sterilization application
|
|
|
J221M4
|
High density metallization on pre-coated co polyester side and other side plain
|
8,10,12 µ
|
-
High Density
-
Good Metal Bond Strength
-
Good Water Vapour and Gas Barrier properties
-
Standard Lamination Bond Strength
-
Excellent Machinability
|
Suitable for flexible packaging application where high barrier and high metal bond is required
|
|
|
J222M1
|
Normal density Metallised on pre-coated co polyester
surface and other side corona treated.
|
10,12,15 µ
|
-
Standard Density
-
Good Metal Bond Strength
-
Standard Water Vapour and Gas Barrier properties
-
Corona side good for Lamination Bond Strength
-
Excellent Machinability
|
Suitable for flexible packaging application where high barrier and high metal bond is required
|
|
|
J222M4
|
High density
Metallized on pre-coated co polyester
surface and other side corona treated
|
10,12 µ
|
-
High Density
-
Good Metal Bond Strength
-
Good Water Vapour and Gas Barrier properties
-
Corona side Good for Lamination Bond Strength
-
Excellent Machinability
|
Suitable for flexible packaging application where high barrier and high metal bond is required
|
|
|
J222M5
|
Ultra high density metallization on pre-coated co polyester side and other side corona
|
12 µ
|
-
High Density
-
Good Metal Bond Strength
-
Excellent Water Vapour and Gas Barrier properties
-
Good Lamination Bond Strength
-
Excellent Machinability
|
Suitable for flexible packaging application where high barrier and high metal bond is required
|
|
|
J231M3
|
Normal density Metallised on plain surface and other
side chemically pre-treated
|
10,12,23 µ
|
-
Standard Density
-
Standard Metal Bond Strength
-
Standard Water Vapour and Gas Barrier properties
-
Good for Printing and Lamination
|
Suitable for flexible packaging application, chemical treated side is suitable for printing
|
|
|
J231M4
|
High density
Metallised on plain surface and other
side chemically pre-treated
|
10,12,23 µ
|
-
High Density
-
Standard Metal Bond Strength
-
Good Water Vapour and Gas Barrier properties
-
Good for printing and Lamination
|
Suitable for flexible packaging application, chemical treated side is suitable for printing.
|
|
|
J232M3
|
Normal density Metallised on corona surface and other side chemically pre-treated.
|
10,12 µ
|
-
Standard Density
-
Standard Metal Bond Strength
-
Standard Water Vapour and Gas Barrier properties
-
Good for Printing and Lamination
|
Suitable for flexible packaging application, chemical treated side is suitable for printing
|
|
|
J232M4
|
High density
Metallised on corona surface and other side chemically pre-treated.
|
10,12 µ
|
-
High Density
-
Standard Metal Bond Strength
-
Standard Water Vapour and Gas Barrier properties
-
Good for printing and Lamination
|
Suitable for flexible packaging application, chemical treated side is suitable for printing
|
|
|
J233M3
|
Normal density Metallised on plain surface with Plasma
and other side chemically pre-treated.
|
8,10,12,15 µ
|
-
Standard Density
-
Standard Metal Bond Strength
-
Standard Water Vapour and Gas Barrier properties
-
Good for Printing with UV Curable Ink and Standard Lamination Bond Strength
|
Suitable for flexible packaging application, chemical treated side is good for surface printing with
UV curable inks.
|
|
|
J234M3
|
Normal density Metallized on Corona surface and other
side Chemically Pre-treated.
|
10,12,15 µ
|
-
Standard Density
-
Improved Metal Bond Strength
-
Standard Water Vapour and Gas Barrier properties
-
Good for printing with UV curable ink and Lamination
|
Suitable for flexible packaging application, Chemical treated side is good for surface printing with
UV curable inks.
|
|
|
J261M0
|
Normal density
Metallised on pre-coated chemical
surface and other side plain.
|
10,12 µ
|
-
Standard Density
-
High Metal Bond Strength
-
Good Water Vapour and Gas Barrier properties
-
Standard Lamination Bond Strength
-
Excellent Machinability
|
Suitable for flexible packaging application where good barrier and high metal bond is required,
film is recommended for liquid packaging application
|
|
|
J262M1
|
Normal density
Metallised on pre-coated chemical
surface and other side corona
|
10,12 µ
|
-
Standard Density
-
High Metal Bond Strength
-
Good Water Vapour and Gas Barrier properties
-
Good Lamination Bond Strength
-
Excellent Machinability
|
Suitable for flexible packaging application where good barrier and high metal bond is required.
Film is suitable for hot fill application also.
|
|
|
J262M4
|
High densityx Metallized on pre-coated co polyester
Surface and other side corona treated.
|
10,12 µ
|
-
High Density
-
High Metal Bond Strength
-
Good Water Vapour and Gas Barrier properties
-
Good Lamination Bond Strength
-
Excellent Machinability
|
Suitable for flexible packaging application where good barrier and high metal bond is required.
Film is suitable for hot fill application also.
|
|
|
J262M5
|
High density Metallized on pre-coated co polyester
Surface and other side corona treated
|
10,12 µ
|
-
High Density
-
High Metal Bond Strength
-
very Good Water Vapour and Gas Barrier properties
-
Good Lamination Bond Strength
-
Excellent Machinability
|
Suitable for flexible packaging application where good barrier and high metal bond is required.
Film is suitable for hot fill application also.
|
|
|
J281M0
|
Normal density Metallization on chemical
coated surface offer high metal adhesion performance.
|
12 µ
|
-
Standard Density
-
High Metal Bond Strength
-
Standard Water Vapour and Gas Barrier properties
-
Excellent Lamination Bond Strength
-
Excellent Machinability
|
Suitable for flexible packaging application where high metal bond is required. Film is suitable for
hot fill applications
|
|
|
J281M5
|
High density
Metallisation on pre-coated chemical surface and other side Non treated
|
12 µ
|
-
High Density
-
Excellent Metal Bond Strength
-
Excellent Water Vapour and Gas Barrier properties
-
Excellent Lamination Bond Strength
-
Excellent Machinability
|
Suitable for flexible packaging application where high barrier and high metal bond is required.
Film is suitable for hot fill applications.
|
|
|
J450M0
|
Normal density
Metallised on plain surface and other side
plain.
|
12,13 µ
|
-
Standard density
-
Good Metal Bond Strength
-
High Gloss
-
Excellent Dimensional/Thermal Stability.
-
Excellent Machinability
|
Specially designed for Metallic yarn application.
|
|
|
J500MO
|
Normal density
Metallised on plain surface and other side plain.
|
23,50,100,110,125,135,140,150 µ
|
-
Standard Density
-
Standard Metal Bond Strength
-
High Gloss
-
Standard Lamination Bond Strength
-
Excellent Machinability
|
Suitable for flexible packaging, glitter powder application, especially for higher gloss
|
|
|
J530M0
|
Normal density Metallised on plain surface and other side plain.
|
50,150 µ
|
-
Standard Density
-
Standard Metal Bond Strength
-
Standard Lamination Bond Strength
-
Excellent Machinability
|
Suitable for flexible packaging, glitter powder application, especially for higher gloss
|
|
|
J700M0
|
Normal density
Metallized on plain surface and other side plain
|
12,23 µ
|
-
Standard Density
-
Isotropic Mechanical property
-
High Thermal Stability and Good Machinability.
-
Standard Metal Bond Strength
-
Good Water Vapour and Gas Barrier properties
|
Suitable for flexible packaging application
|
|
|
J701M0
|
Normal density
Metallized on corona treated surface and other side plain.
|
12,23 µ
|
-
Standard Density
-
Isotropic Mechanical property
-
High Thermal Stability and good Machinability.
-
Improved Metal Bond Strength
-
Good Water Vapour and Gas Barrier properties
|
Suitable for flexible packaging application,
|
|
|
J950MO
|
Normal density
metallised direct matte polyester film with medium
surface gloss.
|
12,23,36,50 µ
|
-
Standard density
-
Medium surface gloss
-
Good dimensional / thermal stability.
-
Excellent Machinability
|
labels and other industrial application.
|
|
|
J952M1
|
Normal density Metallisation on translucent direct matte polyester film and other side corona treated
|
12,23,36,50 µ
|
-
Standard Density
-
Excellent Dimensional / Thermal Stability.
-
Excellent Machinability
-
Suitable for Printing
|
labels and other industrial application.
|
|
|
J951M0
|
Normal density
Metallised direct matte
one side metallised and other side chemically coated.
|
12 µ
|
-
Standard Density
-
Good Dimensional / Thermal Stability.
-
Excellent Machinability
-
Suitable for Printing & Lamination
|
labels and other industrial application.
|
|
|
J504M0
|
Normal density Metallized on Corona surface and other
side plain.
|
23,36,50 µ
|
-
Standard Density
-
Improved Metal Bond Strength
-
Standard Water Vapour and Gas Barrier properties
|
Suitable for flexible packaging application,High Gloss,Excellent Machinability
|
|